ArcadeDaddy.com - GameBox 400-1 Dip Switch Settings

8 DIP-SWITCH MANUAL
(*)DIP-1 Function
1            
ON    System Test       
OFF   Game Mode  (Ex-Factory Setting)  
When "Gamebox" has problem & "Reset" still cannot solve the problem, using
this function can inspect & recover the system program.
When "Gamebox" switch off, DIP-1 setting "On", and "switch-on" system
will be entered as follow
> Monitor check      
   I/O check  
   Sound check  
   
   
   
   
   
   
         
Note:   Method of "I/O Check" return to the main page: 
     (Joystick turn right & hold, press (1) button at the same time
(*)  DIP-2, Game Mode Selection
2     Function      
ON   Arcade Mode      
OFF   Player Self Selection Mode (Ex-Factory Setting)
Arcade Mode:   When switch-on, the front page of picture will going to the game which
                         it played at last (before switch-off). DIP-8 should be set at "ON".
Player Self Selection Mode:  Once switch-on, front page of picture will going to the game list
                                                 table.  DIP-8 should be set on "OFF".                                          
(*)  DIP-3,  DIP-4,   Difficulty Setting
3 4   Difficulty      
ON ON   Difficult      
ON OFF   More Difficult    
OFF ON   Normal      
OFF OFF   Easy  (Ex-Factory Setting)  
(**)  DIP-5,   Controlling button Functional  (K1 ~ K4)
5     Function      
ON   K1 - K4  Functioning    
OFF   K1 - K4 No Function    
(**) DIP-6, DIP-7,  Coin Insert Setting
6 7   Function      
ON ON   1 coin 1 game (Ex-Fty. Setting)
OFF OFF          
OFF ON   2 coins 1 game    
ON OFF   1 coin 2 game    
(**) DIP- 8 ,   Return to the game table
8     Function    
ON   Close      
OFF   Open (Ex-Factory setting)  
It can return to the "game table" either when press "K5" or press & hold "1P" Start
button by 3 secounds.  DIP-8 has functional to control On or Off.  When setting
Off, press & hold "1P Start" button by 3 seconds, it can return to "game table".
When setting "On", it cannot return to the "game table".
NOTE:  (*)  - The function should be set during switch-off.
             (**)  -  The function can be set when processing.
  PROCEDURE OF THE SETTING
1. Switch Off
2. Setting Dip-Switches (Dip 1 - Dip -8)
3. Switch On
4. Following image will be appeared
  1 2 3 4 5 6 7 8  
    ON    
  OFF OFF OFF OFF OFF OFF OFF  
       
                   
                   
   
  1 2 3 4 5 6 7 8  
    ON ON    
  OFF OFF OFF OFF OFF OFF  
       
                   
   
        Push 1P START to Continue …………….  
5.  When it selected the switch on or off that you need, then press "1P Start" to confirm.  After
     finished, it will return to the "game table".